Daftar error kode printer DRYVIEW 5950 2 0

Last updated on 12-11-2019 23:51 in CT-SCAN
Posted ByImron, A.Md

Kebutuhan akan printer memang semakin meningkat, terlebih  x-ray printer seperti Carestream DRYVIEW 5950 Laser Imager. Namun meskipun canggih, setiap perangkat elektronik tentu saja bisa mengalami error. Oleh karena itu, penting bagi Anda untuk mengetahui macam-macam kode rahasia error printer ini sebab kode-kode tersebut bisa membantu Anda menemukan titik permasalahan serta bagaimana cara mengatasinya.

Display Screen

Web Portal

Web Portal Message

Action

004

01004

MIM Core: Internal Software Error

Restart the imager. If the error persists, call for service.

005

20-005

Internal MCS Communications Failure

Restart the imager. If the error persists, call for service.
200
04200MIM Core: Disk Full Load the requested film type and size for jobs
that are waiting for media. If the error persists, call for service.
400
06400MIM Core: Image Page Error Resend the print job from the image source.If
the error persists, call for service.
410
06410 MIM Core: Image Rendering Error Resend the print job from the image source.If
the error persists, call for service.
411
06411 MIM Core: Image Data Error Resend the print job from the image source.If
the error persists, call for service.
420
06420 MIM Core: Internal Software Error Resend the print job from the image source.If
the error persists, call for service.
430
06430 MIM Core: Internal Software Error Resend the print job from the image source.If
the error persists, call for service.
001
10001 MIS: Internal Software Error Restart the imager.
If the error persists, call for service.
003
10003 MIS: Image Buffer Error Restart the imager.
If the error persists, call for service.
015
10015 MIS: Database Error Restart the imager.
If the error persists, call for service.
910
10910 MIS: MCS Communication Failure Restart the imager.
If the error persists, call for service.
006
20006 Disconnected or faulty network
cable
Check and reconnect the network cable on
both ends.
Restart the imager.
If the error persists, call for service.
154
20154 MCS: Internal Communications
Failure
Restart the imager.
If the error persists, call for service.
155
20155 Incompatible MCS Printer Configuration for Hardware Restart the imager.
If the error persists, call for service.
156
20156 Incompatible Software Versions
Installed
Restart the imager.
If the error persists, call for service.
209
20209 Laser Imager Opened During Self
Test
Replace/close the cover. Restart the imager.
If the error persists, call for service.
449
20449 None Change the charcoal filter.
550
20550 None Call service for preventive maintenance.
700
20700 None Restart the imager.
If the error persists, call for service.
701
20701 None Replace/close the cover.
704
20704 None The network connection to the imager has
been lost. Restart the imager.
705
20705 None The imager is restarting (for example, during a
software update). Wait until the restart is complete.
706
20706 None A shutdown that was initiated remotely is
complete. Restart the imager.
915
20915 Internal Image Data Transfer Failed Restart the imager.
If the error persists, call for service.
919
20919 Internal Image Data Render Failed Restart the imager.
If the error persists, call for service.
002
21002 None No action. The error may remain until the film
cartridge is empty. The film cartridge is operating in manual mode and AIQC is off.
116
21116 Film Jam in Area 1U Clear the jam. See the procedure later in this
section.
116
23116 Film Jam in Area 1L Clear the jam. See the procedure later in this
section.
118
21118
or
23118
Film Supply: Internal Hardware
Failure
If the Pause symbol is on, press it to cover the
film cartridge. When the Pause symbol stops
flashing, remove the film cartridge from the
imager. Then reinsert the film cartridge into
the imager.
If the error persists, call for service.
119
21119
or
23119
Film Supply: Internal Hardware
Failure
If the Pause symbol is on, press it to cover the
film cartridge. When the Pause symbol stops
flashing, remove the film cartridge from the
imager. Then reinsert the film cartridge into
the imager.
If the error persists, call for service.
125
21125
or
23125
Film Supply: Internal Hardware
Failure
If the Pause symbol is on, press it to cover the
film cartridge. When the Pause symbol stops
flashing, remove the film cartridge from the
imager. Then reinsert the film cartridge into
the imager.
If the error persists, call for service.
139
21139
or
23139
Film Supply: Unable to Identify
Film Cartridge
If the Pause symbol is on, press it to cover the
film cartridge. When the Pause symbol stops
flashing, remove the film cartridge from the
imager. Then reinsert the film cartridge into
the imager.
If the error persists, call for service.
145
21145
or
23145
Film Supply: Unsupported Film
Type
The imager does not support the loaded film
type. Install a cartridge with a supported film
type.If the error persists, call for service.
146
21146
or
23146
Film Supply: Unsupported Film Size The imager does not support the loaded film
size. Install a cartridge with a supported size.If
the error persists, call for service.
175
21175
or
23175
Rollback Failed to Engage Cartridge If the Pause symbol is on, press it to cover the
film cartridge. When the Pause symbol stops
flashing, remove the film cartridge from the
imager. Then reinsert the film cartridge into
the imager.
If the error persists, call for service.
177
21177 Rollback Home Sensor (S2U) Failed
to Activate in Specified Time
Open the film supply door, top cover, and left
cover. Manually close the upper film cartridge,
using the manual rollback knob, to prevent the
film from fogging. Reinstall/close the covers.
If the error persists, call for service.
177
23177 Rollback Home Sensor (S2L) Failed
to Activate in Specified Time
Open the film supply door, top cover, and left
cover. Manually close the lower film cartridge,
using the manual rollback knob, to prevent the
film from fogging. Reinstall/close the covers.
If the error persists, call for service.
178
21178
or
23178
Film Cartridge Failed to Open If the Pause symbol is on, press it to cover the
film cartridge. When the Pause symbol stops
flashing, remove the film cartridge from the
imager. Then reinsert the film cartridge into
the imager.
If the error persists, call for service.
624
21624
or
23624
Film Supply: Film Calibration Failure Calibrate again.
If the error persists, insert a different film cartridge.If the error still displays, restart the
imager.
If the error persists, call for service.
631
21631
or
23631
Film Supply: Film Calibration Failure - Dmin Outside Target The minimum density of the film is too high.
Calibration results for this film are outside the
normal range. Printing will continue with these
parameters.
If the prints are not optimal, do the calibration
procedure again or insert another film cartridge.
632
21632
or
23632
Film Supply: Film Calibration Failure - Dmax Outside Target The maximum density of the film is lower than
the target density. Calibration results for this
film are outside the normal range. Printing will
continue with these parameters.
If the prints are not optimal, do the calibration
procedure again or insert another film cartridge.
931
21931 Upper Film Supply: Internal Communications Failure Restart the imager.
If the error persists, call for service.
931
23931 Lower Film Supply: Internal Communications Failure Restart the imager.
If the error persists, call for service.
931
25931 RFTag: Internal Communications
Failure
Restart the imager.
If the error persists, call for service.
302
26302 Film Jam in Area 2 Clear the jam. See the procedure later in this
section.
325
26325 Film Jam in Area 2 Clear the jam. See the procedure later in this
section.
326
26326 Film Jam in Area 2 or 3 Clear the jam. See the procedure later in this
section.
543
26543 Film Jam in Area 3 Clear the jam. See the procedure later in this
section.
544
26544 Film Jam in Area 3 Clear the jam. See the procedure later in this
section.
123
27123 Optics: Internal Hardware Failure Restart the imager.
If the error persists, call for service.
931
26931 RFTag: Internal Communications
Failure
Restart the imager.
If the error persists, call for service.
601
27601 Optics: Calibration Failed Restart the imager.
If the error persists, call for service.
604
27604 Optics: Calibration Failed Restart the imager.
If the error persists, call for service.
607

27607

Optics: Calibration Failed

Restart the imager.
If the error persists, call for service.


611
27611
Optics: Internal Hardware Failure
Restart the imager.
If the error persists, call for service.

646
27646

Optics: Internal Hardware Failure

Restart the imager.
If the error persists, call for service.

650

27650

Optics: Internal Hardware Failure

Restart the imager.
If the error persists, call for service.

931

27931

Optics: Internal Communications
Failure


Restart the imager.
If the error persists, call for service.

501

28501

Processor: Internal Hardware Failure

Restart the imager.
If the error persists, call for service.

509

28509
Processor Warm-up Failure

Restart the imager.
If the error persists, call for service.

510

28510

Processor: Internal Hardware Failure

Restart the imager.
If the error persists, call for service.

551

28551

Processor Heater Failure

Restart the imager.
If the error persists, call for service.

554

28554

Processor Over Temperature

Restart the imager.
If the error persists, call for service.

931

28931

Processor: Internal Communications Failure

Restart the imager.
If the error persists, call for service.

924

29924

Densitometer: Internal Diagnostic
Failure

Restart the imager.
If the error persists, call for service.

925

29925
Densitometer: Internal Diagnostic
Failure

Restart the imager.
If the error persists, call for service.

931

29931

Densitometer: Internal Communications Failure

Restart the imager.
If the error persists, call for service.
931

36931

Local Panel: Internal Communications Failure

Restart the imager.
If the error persists, call for service.
935

36935

Local Panel: No Communications
from MCS

Restart the imager.
If the error persists, call for service.

** The time is base on America/New_York timezone